English

Ivalvu yenaliti yeHydraulic ye-20L-12 (ivalvu ye-throttle)

Ivalvu yenaliti yeHydraulic ye-20L-12 (ivalvu ye-throttle) Umfanekiso obonisiweyo
  • Ivalvu yenaliti yeHydraulic ye-20L-12 (ivalvu ye-throttle)
  • Ivalvu yenaliti yeHydraulic ye-20L-12 (ivalvu ye-throttle)

Ivalvu yenaliti yeHydraulic engu-20L-12 (ivalvu yethrottle) yivalvu yokulawula ngokuchanekileyo eyenzelwe ukulawula ngokuchanekileyo ukuhamba kolwelo kwizicelo ezahlukeneyo zoshishino. Ngobukhulu bayo obuncinci, ulwakhiwo oluhlala ixesha elide, kunye nesiqu esinomgca omncinci, inika ukusebenza okuthembekileyo kunye nolawulo oluchanekileyo lwamazinga okuhamba kolwelo. Liyinxalenye ebalulekileyo kwiinkqubo ezifuna ukuphathwa ngokuchanekileyo kolwelo.


Iinkcukacha zeMveliso

Iithegi zeMveliso

Iimpawu zeMveliso

1. Nje ukuba kwenziwe uhlengahlengiso kwivalvu, azinakuguqulwa okanye zilungiswe.
2. Useto olufunekayo lunokulungiswa okanye luthintelwe.
3. Izinto ezihlala ixesha elide zandisa ubomi benkonzo.
Uphawu Lokusebenza Kwemveliso
I-20L-08 ilungisa umda wayo wokugoba ngokujikelezisa indlela yokulungisa ngokuchasene newotshi, iqala kwindawo evaliweyo ngokupheleleyo ize iye kwindawo evulekileyo ngokupheleleyo.

Iinkcukacha zeMveliso

Imodeli yeMveliso Ivalvu yenaliti yeHydraulic ye-20L-12 (ivalvu yombhobho)
Uxinzelelo Lokusebenza Ibha engama-250 (3600 psi)
Ukuhamba 113.6 lpm (30 gpm) eqhelekileyo kwi-7 bar (100 psi) umahluko xa ivuliwe ngokupheleleyo ii-4.5 turns
Ukuvuza Kwangaphakathi 0.15 ml/ngomzuzu (3 drop/ngomzuzu) ubuninzi xa kucinywa
Kufuneka iTorque yoLungiso 0.17 Nm (1.5 intshi-pounds) kwi-7 bar (100 psi);16.9 Nm (150 intshi-pounds) kwi-207 bar (3000 psi)
Ubushushu -40°℃～100°C
Ulwelo Izinto ezisekwe kwiminerali okanye ezenziwe ngokwenziwa ezineempawu zokuthambisa kwi-viscosities ye-7.4 ukuya kwi-420 cSt (50 ukuya kwi-2000 ssu).
Ufakelo Akukho zithintelo
Ikhatriji Ubunzima: 0.2 kg. (0.45 lbs.); Intsimbi eneendawo zokusebenza eziqinileyo. Iindawo ezibonakalayo ezigqunywe nge-zinc
Isitywino Amakhonkco otywino oluhlobo lwe-D; Amaqhosha e-aluminium anodized.
Umzimba oqhelekileyo ofakwe kwiipali Ubunzima: 0.57 kg. (1.25 lbs.); I-alloy ye-aluminium enamandla aphezulu ye-6061 T6 ene-anodized, elinganiswe kwi-240 bar (3500 psi).

Uphawu Lokusebenza Kwemveliso

ivalvu yokulawula ukuhamba-kwendlela ehlawulelwayo (1)

I-20L-12 yonyusa ixabiso layo le-orifice ukusuka ekuvalekeni ngokupheleleyo ukuya ekuvulekeni ngokupheleleyo ngokujikeleza okuchasene newotshi.

Ukusebenza/Ubukhulu

umlawuli wokuhamba-nge-hydraulic
ivalvu yokulawula ukuhamba-okuguquguqukayo-okuguquguqukayo-okuguquguqukayo nge-hydraulic

KUTHENI UKHETHE THINA

UNEEMVA

Sinazo izinto ezingaphezuluIminyaka eli-15amava kule nto.

I-OEM/ODM

Singavelisa njengesicelo sakho.

UMGANGATHO OPHEZULU

Yazisa izixhobo zokucubungula uphawu ezaziwayo kwaye unikezele ngeengxelo ze-QC.

UKUHANJISWA OKUKHAWULEZILEYO

Iiveki ezi-3-4ukuhanjiswa ngobuninzi

INKONZO ELUNGILEYO

Yiba neqela leenkonzo zobungcali eliza kubonelela ngenkonzo yomntu ngamnye.

IXABISO ELIKHUPHISANAYO

Singakunika ixabiso elihle.

Indlela esisebenza ngayo

Uphuhliso(sixelele imodeli okanye uyilo lomatshini wakho)
Isicatshulwa(siza kukunika ikowuteshini ngokukhawuleza okukhulu)
Iisampulu(iisampulu ziya kuthunyelwa kuwe ukuze zihlolwe umgangatho)
Umyalelo(ibekwe emva kokuqinisekisa ubungakanani kunye nexesha lokuhanjiswa, njl.njl.)
Uyilo(kwimveliso yakho)
Imveliso(ukuvelisa iimpahla ngokweemfuno zabathengi)
QC(Iqela lethu le-QC liza kuhlola iimveliso kwaye libonelele ngeengxelo ze-QC)
Iyalayisha(ukulayisha izinto esele zenziwe kwiikhonteyina zabathengi)

Inkqubo yeMveliso

Isatifikethi sethu

udidi06
udidi04
udidi02

Ulawulo lwemeko

Ukuqinisekisa umgangatho weemveliso zasefektri, sazisaizixhobo zokucoca eziphambili kunye nokuvavanya amacandelo, 100% yeemveliso ezidibeneyo ziphumelele uvavanyo lwefektrikwaye idatha yovavanyo lwemveliso nganye igcinwa kwiseva yekhompyutha.

izixhobo1
izixhobo7
izixhobo3
izixhobo9
izixhobo5
izixhobo11
izixhobo2
izixhobo8
izixhobo6
izixhobo10
izixhobo4
izixhobo12

Iqela le-R&D

Iqela le-R&D

Iqela lethu le-R&D liquka10-20abantu, uninzi lwabo oluneIminyaka eli-10yamava omsebenzi.

Iziko lethu le-R&D lineinkqubo yesandi sophando nophuhliso, kuquka uphando lwabathengi, uphando lwabakhuphisana nabo, kunye nenkqubo yolawulo lophuhliso lwemarike.

Siizixhobo zophando nophuhliso ezivuthiweyokuquka ukubalwa koyilo, ukulinganisa inkqubo yomsingathi, ukulinganisa inkqubo ye-hydraulic, ukulungisa iimpazamo kwindawo, iziko lokuvavanya imveliso, kunye nohlalutyo lwezinto ezilinganiselweyo zesakhiwo.

  • Ngaphambili:
  • Okulandelayo:

    Iindidi zemveliso