Ivalvu yenaliti yeHydraulic ye-20L-08 (ivalvu ye-throttle)

Umda wokugoba we-20L-08 ungandiswa ngokujika indlela yokulungisa ijikeleze iwashi, ukusuka kwindawo evaliweyo ngokupheleleyo ukuya kwindawo evulekileyo ngokupheleleyo.

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Iimpawu zeMveliso

1. Nje ukuba kwenziwe uhlengahlengiso lwevalvu, ayinakuguqulwa.
2. Uqwalaselo olufunekayo lunokuthintelwa ngokukhuselekileyo.
3. Izixhobo ezihlala ixesha elide ukuze zisebenze kakuhle.
4. Ukhetho lweqhosha le-aluminiyam.
5. Ukuvala ngokuchanekileyo.
6. Uhlengahlengiso olucwangcisiweyo.
7. Ubungakanani obuncinci.

Iinkcukacha zeMveliso

Imodeli yeMveliso	Ivalvu yenaliti yeHydraulic ye-20L-08 (ivalvu yombhobho)
Uxinzelelo Lokusebenza	Ibha engama-240 (3500 psi)
Ukuhamba	I-42 lpm (11 gpm) eqhelekileyo kwi-7 bar (100 psi) umahluko kwi-3.5turns evulekileyo ngokupheleleyo
Ukuvuza Kwangaphakathi	0.25 ml/ngomzuzu (5 drop/ngomzuzu) ubuninzi xa kucinywa
Kufuneka iTorque yoLungiso	0.56 Nm (5 intshi-pounds) kwi-7 bar (100 psi); 5.41 Nm (48 intshi-pounds) kwi-207 bar (3000 psi)
Ubushushu	﹣40℃~100℃
Ulwelo	Izinto ezisekwe kwiminerali okanye ezenziwe ngokwenziwa ezineempawu zokuthambisa kwi-viscosities ye-7.4 ukuya kwi-420 cSt (50 ukuya kwi-2000 ssu).
Ufakelo	Akukho zithintelo
Ikhatriji	Ubunzima: 0.10 kg. (0.23 lbs.); Intsimbi eneendawo zokusebenza eziqinileyo. Iindawo ezibonakalayo ezigqunywe nge-zinc
Isitywino	Amakhonkco otywino oluhlobo lwe-D; Amaqhosha e-aluminium anodized.
Umzimba oqhelekileyo ofakwe kwiipali	Le mveliso inobunzima obuyi-0.16 kg (0.35 lbs) kwaye yenziwe nge-aluminium alloy enamandla aphezulu eyi-6061 T6. I-anodized ukuze ihlale ixesha elide kwaye ingangeni kumhlwa. Ilinganiswe kwiingcinezelo ezifikelela kwi-240 bar (3500 psi) kwaye inokumelana neengcinezelo eziphezulu.

Uphawu Lokusebenza Kwemveliso

ivalvu yokulawula ukuhamba kwemali ehlawulelwayo

I-20L-08 yonyusa ixabiso layo le-orifice ukusuka ekuvalekeni ngokupheleleyo ukuya ekuvulekeni ngokupheleleyo ngokujikeleza okuchasene newotshi.

Ukusebenza/Ubukhulu

KUTHENI UKHETHE THINA

UNEEMVA

Sinazo izinto ezingaphezuluIminyaka eli-15amava kule nto.

I-OEM/ODM

Singavelisa njengesicelo sakho.

UMGANGATHO OPHEZULU

Yazisa izixhobo zokucubungula uphawu ezaziwayo kwaye unikezele ngeengxelo ze-QC.

UKUHANJISWA OKUKHAWULEZILEYO

Iiveki ezi-3-4ukuhanjiswa ngobuninzi

INKONZO ELUNGILEYO

Yiba neqela leenkonzo zobungcali eliza kubonelela ngenkonzo yomntu ngamnye.

IXABISO ELIKHUPHISANAYO

Singakunika ixabiso elihle.

Indlela esisebenza ngayo

Uphuhliso(sixelele imodeli okanye uyilo lomatshini wakho)
Isicatshulwa(siza kukunika ikowuteshini ngokukhawuleza okukhulu)
Iisampulu(iisampulu ziya kuthunyelwa kuwe ukuze zihlolwe umgangatho)
Umyalelo(ibekwe emva kokuqinisekisa ubungakanani kunye nexesha lokuhanjiswa, njl.njl.)
Uyilo(kwimveliso yakho)
Imveliso(ukuvelisa iimpahla ngokweemfuno zabathengi)
QC(Iqela lethu le-QC liza kuhlola iimveliso kwaye libonelele ngeengxelo ze-QC)
Iyalayisha(ukulayisha izinto esele zenziwe kwiikhonteyina zabathengi)

Isatifikethi sethu

Ulawulo lwemeko

Ukuqinisekisa umgangatho weemveliso zasefektri, sazisaizixhobo zokucoca eziphambili kunye nokuvavanya amacandelo, 100% yeemveliso ezidibeneyo ziphumelele uvavanyo lwefektrikwaye idatha yovavanyo lwemveliso nganye igcinwa kwiseva yekhompyutha.

Iqela le-R&D

Iqela lethu le-R&D liquka10-20abantu, uninzi lwabo oluneIminyaka eli-10yamava omsebenzi.

Iziko lethu le-R&D lineinkqubo yesandi sophando nophuhliso, kuquka uphando lwabathengi, uphando lwabakhuphisana nabo, kunye nenkqubo yolawulo lophuhliso lwemarike.

Siizixhobo zophando nophuhliso ezivuthiweyokuquka ukubalwa koyilo, ukulinganisa inkqubo yomsingathi, ukulinganisa inkqubo ye-hydraulic, ukulungisa iimpazamo kwindawo, iziko lokuvavanya imveliso, kunye nohlalutyo lwezinto ezilinganiselweyo zesakhiwo.

Ngaphambili: Umqhubi wenqwelomoya usebenzise ivalvu yokunciphisa uxinzelelo olulinganiselweyo 23BL-72-30

Okulandelayo: Ivalvu yenaliti yeHydraulic ye-20L-08A (ivalvu ye-throttle)

Ivalvu yenaliti yeHydraulic