English

Ivalvu yokujonga i-Screw-In 20A-G14

Umfanekiso obonisiweyo weValve yokujonga i-Screw-In 20A-G14
  • Ivalvu yokujonga i-Screw-In 20A-G14
  • Ivalvu yokujonga i-Screw-In 20A-G14

I-Screw-In Check Valve 20A-G14 eyenziwe yiNingbo Flag-Up Hydraulic Co., Ltd. yivalvu yokuhlola i-screw-in esebenza kakuhle eyenzelwe ngokukodwa ukusetyenziswa kolawulo lolwelo. Ulwakhiwo lwayo oluqinileyo kunye noyilo oluncinci luvumela ukufakwa lula kwiinkqubo ze-hydraulic. Ngoqhagamshelo lwentambo ye-G14, iqinisekisa ukuhamba okuthembekileyo kwendlela enye kwaye ithintela ukubuyela umva, iqinisekisa ukusebenza okusebenzayo nokukhuselekileyo kumashishini ahlukeneyo.


Iinkcukacha zeMveliso

Iithegi zeMveliso

Iimpawu zeMveliso

1. Isihlalo esiqinileyo esihlala ixesha elide kunye nokuvuza okuncinci.
2. Ubungakanani obuncinci.
3. Ukuvala ngokukhawuleza kunye nokuhlala.

Iinkcukacha zeMveliso

Imodeli yeMveliso Ivalvu yokujonga i-Screw-In 20A-G14
Uxinzelelo Lokusebenza Ibha engama-350 (5100 psi)
Ukuhamba Jonga iTshathi yoKusebenza
Ukuvuza Kwangaphakathi 0.10 ml/ngomzuzu (amathontsi ama-2 ngomzuzu) ubuninzi kwi-350 bar (5100 psi)
Uxinzelelo lweCrack luchaziwe I-gauge bar (psi) ibonakala kwi-① kwi-16.4 ml/min. (1 cu. in./min) ifunyenwe
I-Standard Bias Springs eCrack Ibha eyi-0.5 (7.3 psi)
Ubushushu -40°℃～120°C
Ulwelo Izinto ezisekwe kwiminerali okanye ezenziwe ngokwenziwa ezineempawu zokuthambisa kwi-viscosities ye-7.4 ukuya kwi-420 cSt (50 ukuya kwi-2000 ssu). Ufakelo: Akukho miqathango

Uphawu Lokusebenza Kwemveliso

ivalvu yokulawula ene-spool ezimbini

I-Screw-In Check Valve 20A-G14 ivumela ukuhamba komoya ukusuka kwi-① ukuya kwi-②, ngelixa idla ngokuthintela ukuhamba kweoyile kwicala elichaseneyo. Ikhatriji inomjongo olawulwa ngokupheleleyo ovalwe ngentwasahlobo de kufakwe uxinzelelo olwaneleyo kwi-① ukuvula i-②.

Ukusebenza/Ubukhulu

I-dcv eneendlela ezimbini
ivalvu yokuqhekeza iinkuni ezimbini

KUTHENI UKHETHE THINA

UNEEMVA

Sinazo izinto ezingaphezuluIminyaka eli-15amava kule nto.

I-OEM/ODM

Singavelisa njengesicelo sakho.

UMGANGATHO OPHEZULU

Yazisa izixhobo zokucubungula uphawu ezaziwayo kwaye unikezele ngeengxelo ze-QC.

UKUHANJISWA OKUKHAWULEZILEYO

Iiveki ezi-3-4ukuhanjiswa ngobuninzi

INKONZO ELUNGILEYO

Yiba neqela leenkonzo zobungcali eliza kubonelela ngenkonzo yomntu ngamnye.

IXABISO ELIKHUPHISANAYO

Singakunika ixabiso elihle.

Indlela esisebenza ngayo

Uphuhliso(sixelele imodeli okanye uyilo lomatshini wakho)
Isicatshulwa(siza kukunika ikowuteshini ngokukhawuleza okukhulu)
Iisampulu(iisampulu ziya kuthunyelwa kuwe ukuze zihlolwe umgangatho)
Umyalelo(ibekwe emva kokuqinisekisa ubungakanani kunye nexesha lokuhanjiswa, njl.njl.)
Uyilo(kwimveliso yakho)
Imveliso(ukuvelisa iimpahla ngokweemfuno zabathengi)
QC(Iqela lethu le-QC liza kuhlola iimveliso kwaye libonelele ngeengxelo ze-QC)
Iyalayisha(ukulayisha izinto esele zenziwe kwiikhonteyina zabathengi)

Inkqubo yeMveliso

Isatifikethi sethu

udidi06
udidi04
udidi02

Ulawulo lwemeko

Ukuqinisekisa umgangatho weemveliso zasefektri, sazisaizixhobo zokucoca eziphambili kunye nokuvavanya amacandelo, 100% yeemveliso ezidibeneyo ziphumelele uvavanyo lwefektrikwaye idatha yovavanyo lwemveliso nganye igcinwa kwiseva yekhompyutha.

izixhobo1
izixhobo7
izixhobo3
izixhobo9
izixhobo5
izixhobo11
izixhobo2
izixhobo8
izixhobo6
izixhobo10
izixhobo4
izixhobo12

Iqela le-R&D

Iqela le-R&D

Iqela lethu le-R&D liquka10-20abantu, uninzi lwabo oluneIminyaka eli-10yamava omsebenzi.

Iziko lethu le-R&D lineinkqubo yesandi sophando nophuhliso, kuquka uphando lwabathengi, uphando lwabakhuphisana nabo, kunye nenkqubo yolawulo lophuhliso lwemarike.

Siizixhobo zophando nophuhliso ezivuthiweyokuquka ukubalwa koyilo, ukulinganisa inkqubo yomsingathi, ukulinganisa inkqubo ye-hydraulic, ukulungisa iimpazamo kwindawo, iziko lokuvavanya imveliso, kunye nohlalutyo lwezinto ezilinganiselweyo zesakhiwo.

  • Ngaphambili:
  • Okulandelayo:

    Iindidi zemveliso